1.Installation must be carried out in accordance with the current edition of the local wiring regulations code having jurisdiction. Installation should be performed only by a qualified electrician.
2.Place template against wall at desired height(see mounting height recommendations) and mark locations of 4 mounting holes Dia. 8mm(5/16").
3.Remove and retain 2 side security hex cover screws and cover. Then mount the hand dryer base on the wall.
4.Replace cover. Do not over-tighten screws.
5.Connect the hand dryer plug to the power supply. Connect wire as follows if the dryer is ordered without plug:
A.Connect the live wire to the terminal block marked "L".
B.Connect the neutral wire to the terminal block marked "N".
C.Connect the ground wire to the terminal block marked "E".
1300 - 1500MM
Women:1300 - 1500MM
Children: 1300 - 1500MM
Shake excess water from hands.
Place hands under the outlet to start operation.
Rub hands lightly and rapidly.
Stops automatically after hands are removed.
Periodic cleaning of the unit is recommended.
Remove cover and clean dryer interior dust lint.
Wipe the cover with a damp cloth and mild cleaning solution. Do not soak.
Never use abrasives to clean the cover.